Find the Right CAE Software for Your Challenge

What It Solves

• Slow, Inconsistent Meshing and Model Setup
• Geometry Cleanup and Defeaturing for Simulation
• Mid-Surface Extraction and Mesh Quality Control
• Large Assembly Preprocessing Bottlenecks

How It Helps

HyperMesh streamlines preprocessing with robust geometry tools, controlled meshing workflows, and repeatable model build standards. TrueInsight helps you set templates, best practices, and training so your team meshes faster and gets stable solver runs.

What It Solves

• Structural Performance Validation Under Real Loads
• Weight Reduction Without Sacrificing Stiffness
• Design Optimization Tradeoffs and Constraints
• Durability and Fatigue-Driven Design Decisions

How It Helps

OptiStruct combines structural analysis with powerful optimization workflows so teams can iterate faster and converge on better designs. TrueInsight supports solver setup, workload-fit guidance (including when acceleration applies), workflow onboarding, and best-practice coaching for reliable results.

What It Solves

• Crashworthiness and Impact Response Prediction
• Complex Contacts and High-Speed Events
• Drop Tests and Transient Loading Scenarios
• Material and Deformation Behavior in Extremes

How It Helps

Radioss supports robust explicit simulation workflows for safety and durability programs. TrueInsight helps with model setup, stability best practices, and result interpretation so you can reduce physical prototypes and accelerate decisions.

What It Solves

• Complex Multiphysics Model Setup Overhead
• Meshing Workflows That Are Hard to Standardize
• Long Preprocessing Cycles for Repeated Studies
• Simulation Process Repeatability and Handoffs

How It Helps

SimLab organizes simulation into repeatable steps so teams can reuse methods across projects and reduce setup time. TrueInsight helps you define templates, training, and implementation so the workflow sticks across the organization.

What It Solves

• Meshing Time That Delays Structural Decisions
• Assembly Analysis With Many Parts and Contacts
• Early Validation for Design Iterations
• Quick “What-If” Checks for Engineering Changes

How It Helps

SimSolid accelerates structural insight on complex assemblies so more people can run useful checks earlier. TrueInsight supports onboarding, workflow setup, and practical guidelines so results stay consistent and actionable.

What It Solves

• Slow Concept Validation and Iteration Cycles
• Unclear Load Paths and Stiffness Challenges
• Lightweighting and Material Efficiency Goals
• Early-Stage Optimization Without Heavy Setup

How It Helps

Inspire supports rapid structural evaluation and optimization so teams can converge on better concepts earlier. TrueInsight helps define workflows, training, and integration paths that match your product development process.

What It Solves

• Concept-Stage Uncertainty About Strength and Stiffness
• Time Lost Switching Tools for Early Validation
• Iterations That Require Faster Structural Feedback
• Overbuilt Concepts Due to Limited Insight

How It Helps

Inspire Structures helps teams evaluate structural behavior early and refine concepts before detailed modeling. TrueInsight supports workflow setup, best practices, and training so your team gets dependable outcomes quickly.

What It Solves

• Long Simulation Cycles for Early Design Exploration
• Too Many Design Variants to Simulate Fully
• Slow Decision-Making in Parameter Studies
• Bottlenecks in Iteration-Heavy Programs

How It Helps

PhysicsAI can speed up exploration by enabling rapid predictions once trained, helping teams prioritize what to simulate in depth. TrueInsight helps define the workflow, data requirements, and adoption strategy for practical engineering use.

What It Solves

• Too Many Design Variables to Test by Hand
• Unclear Which Parameters Drive Performance
• Competing Targets Such as Weight, Stiffness and Cost
• Designs That Fail Under Manufacturing Variability

How It Helps

HyperStudy automates the runs, ranks the variables that matter and converges on balanced designs, including robustness and reliability studies. TrueInsight helps you define objectives and constraints, set up studies and interpret trade-offs.

What It Solves

• Casting Defects That Appear Late in Production
• Risk in Gating and Feeding Design Decisions
• Trial-and-Error Iterations in Tooling
• Quality Issues Tied to Process Conditions

How It Helps

Inspire Cast supports earlier process validation so you can reduce scrap, shorten tooling iterations, and improve confidence before committing. TrueInsight helps you set up workflows, training, and practical checks aligned to your process.

What It Solves

• Print Failures and Costly Trial Builds
• Manufacturing-Driven Distortions and Risk
• Too Many Iterations Between Design and Print
• Uncertainty in AM Feasibility Decisions

How It Helps

Inspire Print3D helps teams validate AM decisions earlier and reduce wasted material and machine time. TrueInsight supports onboarding, workflow definition, and integration into your AM development process.

What It Solves

• Extrusion Die Iteration and Tuning Time
• Flow Imbalance and Profile Quality Issues
• Process Uncertainty During Ramp-Up
• Rework Caused by Late Process Discovery

How It Helps

Inspire Extrude helps teams evaluate process behavior earlier so you can reduce trial runs and improve quality. TrueInsight provides implementation support, training, and best practices to fit your extrusion workflow.

What It Solves

• Injection Molding Defects and Rework
• Long Tooling Iterations Due to Uncertainty
• Gate, Runner, and Cooling Design Risk
• Quality Issues Discovered Late in Production

How It Helps

Inspire Mold supports early process validation to reduce scrap and accelerate tooling sign-off. TrueInsight helps teams adopt consistent workflows, training, and practical checks that improve reliability across programs.

What It Solves

• Formability Risk and Late Cracking Issues
• Costly Die Tryout Iterations
• Uncertainty in Stamping Feasibility
• Rework Caused by Late Process Discovery

How It Helps

Inspire Form helps engineers validate forming decisions early, reduce physical tryouts, and improve quality. TrueInsight supports training, workflow setup, and process-aligned adoption for faster impact.

What It Solves

• Foam Fill Defects and Inconsistent Results
• Slow Trial-and-Error Process Tuning
• Uncertainty During Ramp-Up and Scaling
• Waste From Failed Runs and Rework

How It Helps

Inspire PolyFoam supports earlier process understanding so teams can reduce scrap and improve repeatability. TrueInsight helps implement practical workflows, training, and adoption aligned to your production needs.

What It Solves

• Uncertainty in Bulk Material Flow Behavior
• Process Inefficiencies in Handling and Mixing
• Equipment Wear and Performance Bottlenecks
• Trial-and-Error Tuning in Bulk Processes

How It Helps

EDEM helps teams model how particles move and interact so you can reduce prototyping and improve equipment decisions. TrueInsight supports onboarding, calibration approach, and workflow adoption for practical manufacturing results.

What It Solves

• PCB Review Bottlenecks and Manual Checks
• DFM and Verification Issues Found Late
• Cross-Team Collaboration Gaps on Layouts
• Risk of Errors Moving From Design to Build

How It Helps

PollEx helps teams review, verify, and approve PCB layouts more efficiently to reduce mistakes and speed sign-off. TrueInsight supports deployment, training, and verification/DFM checklist rollouts tailored to your workflow so reviews stay consistent across teams.

What It Solves

• Slow Iteration Cycles in Power Electronics Design
• Control Stability and Transient Behavior Risk
• Hardware Rework Due to Late Validation
• Inefficient Tuning of Converters and Drives

How It Helps

PSIM helps teams simulate and iterate faster on power stages and controls so you can reduce prototyping and accelerate design decisions. TrueInsight supports workflow setup, training, and practical validation strategies.

What It Solves

• Control Design Risk in Power Converter Projects
• Slow Tuning Cycles and Validation Effort
• Uncertainty in Stability and Control Behavior Across Scenarios
• Rework Caused by Late Control Issues

How It Helps

SmartCtrl helps teams develop and tune control loops faster, using structured workflows for stability/response evaluation and practical iteration. TrueInsight helps with onboarding, workflow alignment (incl. handoffs to tools like PSIM when relevant), and testing approaches that match real engineering

What It Solves

• Slow Embedded Development and Iteration Loops
• Manual Translation From Models to Code
• Inconsistent Implementation Across Teams
• Time Lost Validating Embedded Behavior Changes

How It Helps

Embed helps teams streamline embedded development with model-based workflows and faster iteration. TrueInsight supports setup, training, and adoption so your team ships stable embedded logic with less friction.

What It Solves

• System-Level Behavior Uncertainty Early in Design
• Slow Control Development and Validation Cycles
• Fragmented Models Across Domains and Teams
• Risk in Architecture Decisions Without Simulation

How It Helps

Activate helps teams model and simulate systems earlier so you can validate concepts and control strategies before detailed builds. TrueInsight supports templates, training, and workflow rollout for consistent usage.

What It Solves

• Manual Calculations and Repetitive Engineering Tasks
• Disconnected Scripts and Hard-to-Maintain Workflows
• Slow Data Processing for Engineering Studies
• Inefficient Automation Across Tools and Teams

How It Helps

Compose supports faster analysis and automation through scripting and reusable workflows. TrueInsight helps define practical use patterns, onboarding, and integration points so your team gets value quickly.

What It Solves

• Antenna Performance Uncertainty and Rework
• EMC/EMI Risk Discovered Late in Programs
• Placement and Integration Challenges on Platforms
• RF Design Tradeoffs That Require Simulation Insight

How It Helps

Feko supports RF design decisions with simulation-driven insight, helping teams improve performance and reduce physical iterations. TrueInsight supports setup, best-practice workflows, and expert guidance for real engineering outcomes.

What It Solves

• Motor and Transformer Performance Uncertainty
• Electromagnetic Design Tradeoffs
• Time Lost in Iterative Prototype Builds
• Risk in Magnetics-Driven Product Decisions

How It Helps

Flux supports practical electromagnetic design workflows so teams can evaluate options and improve performance with fewer iterations. TrueInsight helps with implementation, training, and workflow setup tailored to your application.

What It Solves

• Flow and Thermal Uncertainty in Product Designs
• Slow CFD Setup and Long Iteration Loops
• Cooling and Pressure Drop Design Tradeoffs
• Risk in Performance Decisions Without Simulation

How It Helps

Altair CFD supports faster insight into fluid and thermal behavior so teams can iterate with confidence. TrueInsight helps with workflow onboarding, meshing practices, and implementation to match your engineering process.

What It Solves

• Slow Aerodynamic Iteration Loops
• Limited Ability to Explore Many Design Variants
• Uncertainty in External Flow Performance Early in Design
• Risk in Early Aerodynamic Decisions

How It Helps

FlightStream supports faster aerodynamic insight for concept validation and down-selection, so teams can narrow designs earlier with more confidence. TrueInsight helps implement repeatable study workflows, training, and practical best practices for consistent aerodynamic screening.

What It Solves

• CFD Meshing Bottlenecks and Rework
• Geometry Preparation Issues for CFD
• Inconsistent Mesh Quality Across Teams
• Slow Turnaround for Repeated CFD Studies

How It Helps

HyperMesh CFD helps teams prepare CFD models faster with controlled meshing and repeatable preprocessing steps. TrueInsight supports setup, meshing standards, and training so CFD projects move with less friction.

What It Solves

• Slow Model Development and Deployment Cycles
• Fragmented Analytics Workflows Across Tools
• Difficulty Operationalizing AI Outcomes
• Manual Data Science Processes That Do Not Scale

How It Helps

RapidMiner supports end-to-end analytics workflows so teams can move from data preparation to models and deployment more efficiently. TrueInsight helps with onboarding, governance guidance, and practical adoption strategies.

What It Solves

• Limited Visibility Into Real-Time Operational Data
• Slow Dashboard Creation and Inconsistent Reporting
• Difficulty Monitoring Performance and Anomalies
• Decision Delays Due to Fragmented Information

How It Helps

Panopticon enables fast visualization and monitoring so teams can track KPIs and respond sooner. TrueInsight helps define dashboard scope, implementation, and adoption so reporting becomes actionable.

What It Solves

• Time-Consuming Manual Data Cleaning
• Inconsistent Data Preparation Across Teams
• Difficulty Extracting Usable Data From Files and Reports
• Delays in Analytics Due to Poor Data Readiness

How It Helps

Monarch accelerates data preparation so teams can deliver analysis faster with more consistent inputs. TrueInsight helps implement repeatable workflows and governance-friendly practices for dependable outputs.

What It Solves

• Difficulty Building Reliable Predictive Models
• Slow Model Iteration Cycles
• Challenges Operationalizing Predictive Insight
• Fragmented Analytics Processes Across Teams

How It Helps

Knowledge Studio supports structured predictive analytics so teams can move from data to usable models more efficiently. TrueInsight helps with onboarding, workflow planning, and adoption aligned to your data maturity.

What It Solves

• Slow Industrial Design Visualization Cycles
• Difficulty Communicating Design Intent to Stakeholders
• Inefficient Concept Presentation Workflows
• Iteration Delays Due to Unclear Visuals

How It Helps

Inspire Studio improves concept communication with strong visualization workflows that reduce back-and-forth. TrueInsight helps teams adopt efficient design review practices and integrate visualization into product development.

What It Solves

• Disconnected CAD, CAM, and Engineering Workflows
• Slow Design Iteration and Change Management Friction
• Inefficient Handoffs Between Design and Manufacturing
• Complex Product Development That Needs One Platform

How It Helps

NX helps unify core design and manufacturing workflows so teams can reduce handoff friction and improve consistency. TrueInsight supports licensing guidance, implementation planning, and training for faster adoption.

What It Solves

• Slow Mechanical Design and Documentation Cycles
• Bottlenecks in Creating Consistent Drawings and Models
• Collaboration Friction Between Engineering Teams
• Inefficiencies When Iterating Designs Frequently

How It Helps

Solid Edge supports faster design creation and clearer communication through modeling and documentation workflows. TrueInsight helps with onboarding, licensing, and training to get teams productive quickly.

What It Solves

• Slow CNC Programming and Iteration Loops
• Inconsistent Machining Outcomes Across Programmers
• Risk in Toolpath Strategy and Process Planning
• Bottlenecks Moving From Design to Shop Floor

How It Helps

NX CAM helps streamline CNC workflows so teams can program faster, reduce errors, and reuse proven programming methods. TrueInsight supports implementation guidance, post/NC workflow rollout, training, and best-practice standardization aligned to your machining processes.

What It Solves

• Complex CFD Projects That Require Multiphysics Coupling
• Long Setup Cycles and Inconsistent CFD Workflows
• Performance Uncertainty in Flow and Thermal Behavior
• Risk in Design Decisions Without CFD Validation

How It Helps

STAR-CCM+ supports robust CFD workflows for advanced engineering programs. TrueInsight helps define the right adoption path, onboarding, and workflow standards so teams get dependable CFD results faster.

What It Solves

• Late Discovery of Cooling and Flow Issues
• CFD Access Barriers for Design Teams
• Slow Iteration Between CAD and Analysis
• Uncertainty in Thermal and Airflow Tradeoffs

How It Helps

FloEFD helps design teams run CFD studies earlier inside familiar CAD workflows. TrueInsight supports onboarding, best practices, and process integration so CFD becomes a repeatable design step.

What It Solves

• Poor Control of Product Data and Revisions
• Change Management Bottlenecks and Confusion
• Collaboration Issues Across Engineering Teams
• Lack of Traceability From Requirements to Release

How It Helps

Teamcenter supports structured PLM processes so teams can reduce errors and keep stakeholders aligned across the lifecycle. TrueInsight helps plan implementation, adoption, and integration with your CAD and manufacturing stack.

What It Solves

• Slow Application Delivery and Backlogs
• Manual Business Processes That Need Automation
• High Effort for Internal Tools and Workflow Apps
• Difficulty Iterating Apps With Business Stakeholders

How It Helps

Mendix accelerates application delivery so teams can launch, iterate, and improve processes faster. TrueInsight supports onboarding, governance guidance, and implementation planning for scalable low-code adoption.